How To Design Patio Door Curtains

System Patio Door Curtains

Patio door curtains – Curtains are not just for windows; they can be used to cover doors as well. Large, open doors seem sharp when located against a long wall. Curtains break up space, give privacy and add a luxurious decorative element when it adjoins decorative rods. Covers installed halfway up each side of the door can hold the panels back when you want the door to remain clear.

Instructions

Measure the width of the door and add 8 inches to the total. Buy a drapery rod long enough to bridge the distance. The extra inches will be distributed on each side of the door, giving enough room for the patio door curtains to be tucked away from the door. Measure 4 inches above the top of the right corner of the door, then 4 inches to the right and highlight the wall. Repeat for the left corner. Place a mounting bracket over each mark and mark the screw holes. Make sure the holes are level above the top of the door and adjust if necessary.

READ ALSO:   Gas Fireplace Insert: Can You Choose Inserts for Gas Fireplaces

Place a control detector over the selected locations to determine if you need anchor. If there are no studs available for assembly, mount an electric drill bit with a size smaller than the mounting screws. Drill a guide hole through each screw whole brand. Place the mounting brackets over the anchor or marks and screw the fasteners into place. Measure and mark a place halfway up on each side of the door along the opening or trim. Center the curtain opening in the middle of the bar and collect the fabric curtain behind the covers. Let patio door curtains flat against the wall or pull it until it balloons slightly over the edge of the covers.