Display Cabinet With Glass Doors – A showcase is a piece of furniture made of wood and glass that is used to store utensils or decorations and leave them in view. It is a classic in the oldest houses, which is worth recovering and incorporating, whether in the dining room, living room or even a wide hallway. In the piece of the door you have to make a frame of 10 cm above and the 2 sides, but in the lower part, you have to mark the legs.
Leave 3 cm at each end and from these points pull a diagonal until you reach 8.5 cm in width, leaving a height of 12 cm. The frame that was left of 10 cm subdivided into 2 equal parts of 5 cm, one will be the frame of the furniture and the other the display cabinet with glass doors. These edges that were marked on the sides, the door of the showcase and the rear must be cut with the jigsaw.
18 Picture Gallery: Build Display Cabinet With Glass Doors
In all the frames where the glass will go, you have to make a recess by the edge to be able to support them. This draft is made with the Tupi or router, using a router that gives just the size of the recess, which is 1 cm wide and 4 mm thick. To start the assembly of the display cabinet with glass doors you have to fix the 2 sides (which are already with the draft for the glass) and the lower and upper parts.
This post topic: Cabinet Ideas